弹塑性梁在轴向应力波下的动态屈曲

本文考虑轴向应力波效应，利用分叉理论研究各种支承半无限长弹塑性梁的动态屈曲问题。在轴向阶梯载荷和脉冲载荷冲击下得到了梁的临界屈曲载荷及初始屈曲模态。其结果与实验现象相一致。同时也为研究结构动态屈曲问题提供了有效途径。     

柱壳在轴向冲击载荷作用下动态塑性屈曲的实验研究

圆柱壳的动态塑性屈曲问题的研究主要是集中在屈曲模态方面，至于屈曲的临介载荷与临介时时间则研究的较少，ＳＨＰＢ用于研究材料在高应变率下动态力学性能已为大家所熟悉，但用于研究结构的动态屈曲则未见报道，本文利用一装置对柱壳的动态塑性屈曲进行了实验研究，测出了壳体屈曲过程的载荷，轴向缩短量与时间的关系曲线，得到屈曲时的临介载荷与临介时间，同时发现壳体屈曲变形的一些规律并与静态实验的结果进行了比较，为理论分     

Dealloyed PtCu catalyst as an efficient electrocatalyst in oxygen reduction reaction

Pt-transition metal alloy catalysts with an active Pt surface have exceptional properties for use in oxygen electro-reduction reactions in fuel cells. Herein, we report the simple synthesis of dealloyed PtCu catalysts and their catalytic performance in oxygen reduction. The dealloyed PtCu catalysts consisted of a Pt-enriched shell with a Pt–Cu alloy core and were synthesized through a chemical co-reduction process followed by thermal annealing and chemical dealloying. During synthesis, thermal annealing leads to a high degree of formation of PtCu alloy particles (e.g., PtCu or PtCu₃), and chemical dealloying causes selective dissolution of unstable Cu species from the surface layers of the PtCu alloy particles, resulting in a PtCu alloy@Pt-enriched surface core–shell configuration. Our PtCu₃/C catalyst exhibits a great improvement in the oxygen reduction reaction with a mass activity of 0.501 A/mg_Pt, which is 2.24 times greater than that of a commercial Pt catalyst. In this article, the synthesis details, characteristics and performance improvements in ORR of chemically dealloyed PtCu catalysts are systemically explained.     

Electron irradiation-enhanced core/shell organization of Al(Cr,Fe, Mn)Si dispersoids in Al–Mg–Si alloys

The age hardening 6061-T6 aluminium alloy has been chosen as structural material for the core vessel of the material testing Jules Horowitz nuclear reactor. The alloy contains incoherent Al(Cr, Fe, Mn)Si dispersoids whose characterization by energy-filtered transmission electron microscopy (EFTEM) analysis shows a core/shell organization tendency where the core is (Mn, Fe) rich, and the shell is Cr rich. The present work studies the stability of this organization under irradiation. TEM characterization on the same particles, before and after 1 MeV electron irradiation, reveals that the core/shell organization is enhanced after irradiation. It is proposed that the high level of point defects, created by irradiation, ensures a radiation-enhanced diffusion process favourable to the unmixing forces between (Fe, Mn) and Cr. Shell formation may result in the low-energy interface segregation of Cr atoms within the (Fe, Mn) system combined with the unmixing of Cr, Fe and Mn components.     

ZnO/ZnS核-壳量子点的双光子吸收效应

利用飞秒激光Z-扫描与泵浦-探测技术,研究了室温下ZnO/ZnS与ZnO/ZnS/Ag核-壳胶体量子点的双光子吸收效应.研究发现:ZnO基核-壳量子点的本征双光子吸收系数比ZnO体材料增大了3个数量级;测量得到的660 nm处的ZnO/ZnS核-壳量子点双光子吸收截面约为4.3×10^-44 cm⁴·s·photon^-1,比相应的ZnS、ZnSe及 CdS量子点大2个数量级;当ZnO/ZnS核-壳量子点镶嵌了银纳米点时,非线性吸收有所增强.ZnO基复合纳米结构的双光子吸收增强可归因于量子限域与局域场效应.     

环形板的非轴对称屈曲分析

本文利用打靶法研究了内外边界固支且在外边界受均匀径向压力作用下的极正交各向异性环形板的非轴对称屈曲和过屈曲,计算了临界载荷,讨论了分支解的存在性,得到了分支解的渐近表达式,分析了环形板的屈曲性态。     

壳体结构优化及其DDDU(W)新版本

本文建立了壳体结构优化的序列二次规划模型,对八节点等参壳单元做了优化处理,扩充了通用结构优化程序DDDU(W)的功能。文末算例表明了算法的合理性与有效性。     

Natural Vibrations of Ribbed Cylindrical Shells with Low Shear Stiffness

A technique is proposed to determine the natural frequencies of rib-reinforced cylindrical shells with low shear stiffness. The equations of motion based on the Timoshenko model are used. The influence of the transverse shear moduli of the shell and ribs on the minimum natural frequencies and corresponding modes is studied by way of numerical examples. It is shown that the effect of the discrete ribs is different from that predicted by the classical theory of ribbed shells__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 4, pp. 66–74, April 2005.     

中厚板屈曲的加权残值方法

用加权残值方法分析了矩形中厚板的屈曲问题。试函数和权函数依据短梁函数进行构造。结果良好。